Ultrasonic Animal Repeller
Solar Powered Ultrasonic Animal Repeller with Motion Activated and Flashing LED Lights to Stop Dogs, Cats, Racoon, Deer, Birds, Skunks, Squirrels, Rabbit, Fox and More, without using dangerous and messy chemicals, pesticides, sprays, or traps that can harm you and your family.
Showing all 10 results
Showing all 10 results
Solar Ultrasonic Animal Repellent With Motion Detector Lights Keep Animal Away For Garden.
Animals can damage your yard by eating foliage.
Losing precious plants, trees and entire crops to demolition by Animals and other creatures is distressing and discouraging. Chances are you’re here because you’ve already lost crops or landscape plants from Animal. We totally know your pain, for it has happened to us multiple times with multiple different crops.
We are on a mission to get rid of animals away from your garden, preventing them from entering your property, eating your plants, and destroying your lawn.
SAY GOODBYE TO UNWELCOMED Animal!
With the help of Solar Ultrasonic Animal Pest Repeller, you can get rid of Animals. Coverage Area: 30 feet @ 1100=2.425 square feet.
- Emits sound waves to repent pests and animals
- Solar charging
- Guard for your garden or yard
- Easy to install and use.
How to Use?
- Step 1. Unpack the unit completely and confirm that all parts are present.
- Step 2. Connect the repeller head, pole sections, connecting part and ground stake.
- Step 3. Turn the power switch to the “ON” position.
The PIR repeller is designed to be left ON continuously. It uses four 2/3AA sizes of NI-MH rechargeable batteries. Once turned ON, the Red-LED light and ultrasonic signal will activate for 15 seconds. During the time there are sound waves for 2.5 seconds in the beginning. At the same time, the White-Led lights flash blasting. Following this activation, The unit will move to standby mode.
The unit is now ready for installation. The location should allow adequate sunlight to keep the batteries fully charged. Be sure that the area needing protection is within the effective range of the repeller.
For best results, keep the repeller head roughly 9-10 inches above the ground.
Take care not to stress or break the repeller when installing on hard ground. It is a good idea to prepare the ground for the ground stake to avoid damage to the unit.
When the PIR sensor detects motion, Red-LED light will be lit up, The ultrasonic signal and the White-LED lights will run for 15 seconds. Following this, the repeller will return to standby mode.
When the device is working and the PIR sensor detects motion, the device will run for another 15 seconds the next time.
How does Animal repellent work?
This repeller is designed for permanent service allowing you to install it once and let it work! It works all year round and in virtually all weather conditions. It uses solar power to recharge the batteries so it’s always working.
Simply inserts the Ultrasonic Animal Repellent into the ground soil where there is plenty of sunlight and switch it on. Portable and small size design, it can be installed in your home, garden, courtyard, or somewhere else. Once Animal enter the protection range, the Passive InfraRed sensor (PIR) detects motion and triggers the ultrasonic speaker emitting a tone that people cannot hear but chases away common outdoor pests like dogs, cats, animals, raccoons, mice, skunks, squirrels and more. This solar animal repeller is a safe and humane way to keep unwanted animals away!
Naturally drives animals and other animals out without killing them. Made of anti-UV and material, suitable for all weather conditions. SOLAR energy technology, charge itself under the sun and is wireless and rechargeable. Don’t worry about getting new batteries anymore! Repeller features FLASHING light to scare the animals.
Equipped with a solar panel as the power supply, cost-effective. The sealed design allows it to work under any weather. Solar panels can effectively charge the product to maintain a long time all day head standby. In the outdoors do not have to worry about the product will need a power outlet.
- Unit Dimensions: 5-1/2* W x 3-1/2″ D x 14-1/3″ H.
- Unit Weight: 8-1/2 Ounces.
- Power Supply: 4 × 2/3AA Ni-MH rechargeable batteries.
- Power Consumption: working=150mA standby≤10uA
- Ultrasonic Frequency: 25-61KHz
- Coverage Area: 30 feet @ 1100=2.425 square feet
- 1 * Ultrasonic Animal Repeller
- 1 * Instruction Manual
- 3 * Stakes
Allow the Animal Repeller to operate continuously for best results:
- Do not immerse the animal repeller in water.
- Do not cover up the PIR sensor.
- To clean the animal repeller, use a damp soft cloth and mild soap with water.
- Do not use harsh chemicals or abrasive cleaning agents that may damage the animal repeller.